logocuoi.png

  • sk
  • sk
    HomeSẢN PHẢMFACTORY AUTOMATIONSunX - Panasonic 〉 Small / Slim Object Detection Area Sensor NA1-11

    ONLINE SUPPORT

    MR. TUNG

    0934 36 1799

    [email protected]

    Small / Slim Object Detection Area Sensor NA1-11
    Small / Slim Object Detection Area Sensor NA1-11

    Cross-beam scanning system to detect slim objects

    Small / Slim Object Detection Area Sensor NA1-11
    UL Recognaized CE Marking

    UL , CE Approved
    CE : EMC Directive
    UL : Recognition(Excluding 5 m cable length type)

    Features

    Letters or business cards detectable!

    Slim objects can be detected by the cross-beam scanning system.

    Letters or business cards detectable!

    Emitting and receiving element pitch: 10 mm 0.394 in

    A minimum sensing object size of ø13.5 mm ø0.531 in can be detected by an emitting and receiving element pitch of 10 mm 0.394 in.

    Emitting and receiving element pitch: 10 mm 0.394 in

    Wide area

    Though being extremely slim, it has a wide sensing area of 1 m 3.281 ft length and 100 mm 3.937 in width. It is most suitable for object detection on a wide assembly line, or for detecting the dropping of, or incursion by, small objects whose travel path is uncertain.

    Wide area

    Just 10 mm 0.394 in thick

    It is extremely slim, being just 10 mm 0.394 in thick .
    Further, it can be mounted in a narrow space as you can select from two cable orientation directions.

    Just 10 mm 0.394 in thick

    Globally usable

    It conforms to the EMC Directive and the UL Recognition.
    Moreover, PNP output type, which is much in demand in Europe, is also available.

    No synchronization wire

    Wiring is saved and made simple as no synchronization wire is required between the emitter and the receiver.

    No synchronization wire

    Clearly visible indicator

    A clearly visible large indicator, having a 55 mm 2.165 in width, is incorporated on both the emitter and the receiver. Further, if the sensing output is directly connected to the large indicator input, the indicator can be conveniently used as a large operation indicator.
    Moreover, its operation is selectable between lighting or blinking.

    Clearly visible indicator

    Cross-beam Scanning System

    In a conventional area sensor, slim objects cannot be detected since the emitting and the receiving elements are scanned synchronously as a set. In contrast, in NA1-11, only the elements 1 to 11 of the emitter are scanned to obtain emission. The elements of the receiver are not scanned, so that when element 1 of the emitter emits light, all the elements of the receiver receive light. Hence, even if there is one element on the receiver which does not receive light, it results in light interrupted operation. With this technique, detection of slim objects is possible.

    Cross-beam Scanning System

    THU DUC TECH Co., Ltd

    Address: : A12/2A  Le Van Viet, Tang Nhon Phu A Ward , 9 District, Ho Chi Minh City

    Phone: 0934 36 1799

    Email: [email protected]

    www.thuductech.com.vn

    0934 361 799