logocuoi.png

  • sk
  • sk
    Trang chủ 〉 Brand 〉 FACTORY AUTOMATION 〉 SunX - Panasonic 〉 CMOS type Micro Laser Distance Sensor HG-C
    CMOS type Micro Laser Distance Sensor HG-C
    CMOS type Micro Laser Distance Sensor HG-C
    Lượt xem : 1183

    Product name: CMOS type Micro Laser Distance Sensor HG-C

     

    Category: Sensors

     

    c icon4

     

     

    cellphone   CONTACTS: 0934.361.799

    Contact

    Details

    Reliable detection in repeatability 10 μm*
    *HG-C1030(-P)
    UL C-UL Recognaized CE Marking FDA

    UL/C-UL , CE , FDA Approved

     

    Analog output can be selected either "Analog voltage output" or "Analog current output".

     

    Features

     

    Model No.HG-C1030HG-C1050HG-C1100HG-C1200HG-C1400
    Measurement center distance 30 mm
    1.181 in    		 50 mm
    1.969 in    		 100 mm
    3.937 in    		 200 mm
    7.874 in    		 400 mm
    15.748 in
    Measurement range ±5 mm
    0.197 in    		 ±15 mm
    0.591 in    		 ±35 mm
    1.378 in    		 ±80 mm
    3.150 in    		 ±200 mm
    7.874 in
    Beam diameter ø50 μm
    1.969 mil
    approx.    		 ø70 μm
    2.756 mil
    approx.    		 ø120 μm
    4.724 mil
    approx.    		 ø300 μm
    11.811 mil
    approx.    		 ø500 μm
    19.685 mil
    approx.
    Repeatability 10 μm
    0.394 mil    		 30 μm
    1.181 mil    		 70 μm
    2.756 mil    		 200 μm
    7.874 mil    		 300 μm 11.811 mil
    （Measuring distance 200 to 400mm
    7.874 to 15.748 in）
    800 μm 31.496 mil
    （Measuring distance 400 to 600mm
    15.748 to 23.622 in）

     

    Equipped with 0 to 5 V analog output and 4 to 20 mA analog current output

    The value can be measured with a distance measurement sensor.
    ・ Linearity：±0.1%F.S.*
    ・ Temperature characteristics：0.03%F.S./℃
    *HG-C1030(-P)/HG-C1050(-P)/HG-C1100(-P)

     

    The sensor not only indicates measured values in mm but also produces analog voltage outputs. 
    Various calculations and storage (logging) can be performed when output is taken into a PLC + analog unit.
    Equipped with 0 to 5 V analog output

     

    Compact and light-weight

    A new optical system with a built-in mirror
    In general, more accurate and stable measurements can be obtained by increasing the optical path length between the light-receiving part and the light receiving element (CMOS), but this also increases the sensor depth and the sensor body gets bigger.
    The HG-C series sensors incorporating a new optical system with a built-in mirror provides smaller sensor depth as well as higher measurement accuracy equivalent to displacement sensors.
    A new optical system with a built-in mirror

    An aluminum die-cast casing protects from strain and heat
    A light-weight but strong die-cast aluminum casing has been adopted. A compact, solid body casing reduces the impact of strain and heat on the measurement accuracy.
    An aluminum die-cast casing protects from strain and heat

     

    Overwhelmingly stable 
    Precise measurements on the order of 1/100 mm 0.0003 inch*

    *HG-C1030(-P)

    Fitted with a precise CMOS image sensor and an original algorithm
    Thanks to a precise CMOS image sensor, it is now possible to perform highly precise measurements in the order of 1/100 mm 0.0003 in. The existing adjustable range reflective sensors cannot achieve such accuracy.
    Fitted with a precise CMOS image sensor and an original algorithm

     

    Useful functions

    Teaching & window comparator mode

    With an object below the sensor, press the TEACH key to set the valid range for distances via threshold values. There are 3 methods for setting the valid range: 1-point, 2-point, and 3-point teaching.

     

    1-point teaching





    Perform 1-point teaching and the threshold range is set for the distance from the reference surface of the sensing object.
    This is used for sensing within the threshold range.

     

    2-point teaching





    Press TEACH once for the lower (first point) and once for the upper limit (second point).

     

    3-point teaching



    This is the method to set the threshold range by conducting the teaching at 3 points (sensing object A, B and C). After teaching, the reference points are automatically sorted in ascending order (reference point 1, 2 and 3). The thresholds are set at the midpoints between reference point 1 and 2, and 2 and 3, respectively.

     


    In addition to the teaching & window comparator mode, the “rising differential mode”, “trailing differential mode” and “normal sensing mode” are available.
    In normal sensing mode, “2-point teaching” as basic teaching and “limit teaching,” which is useful for very small objects and backgrounds, are possible.

     

    Timer setting function

    The time mode options are “off-delay timer,” “on-delay timer,” “one-shot timer” and “no timer.” The counting time is fixed to 5 ms.

     

    Timer setting function

    Off-delay timer
    Function : Extends output signals by 5 ms.
    Usage : Appropriate in case a connected device is slow to respond and ON time is required to extend.

    On-delay timer
    Function: Overrides output signals for 5 ms after detection.
    Usage: Convenient way to override temporary signals and control with a time lag.

    One-shot timer
    Function: Sends output signals for only 5 ms after detection.
    Usage: Useful when the signal duration needs to be constant to meet inputs from a connected device.
    This mode is also used to extend temporary signals by a desired length of time.

     

    Zero set function
    This function compulsorily sets the measured value to “zero.”
    The zero point can be set at a desired value. It is useful when measuring steps or tolerance with reference to the height of a sensing object.
    Zero set function
    * The zero set indicator (yellow) will turn ON while the zero set is valid.
    * When the zero set function is executed while the peak hold function or the bottom hold function is valid, the held measurement value is reset.
    * When the display setting is set to offset, the zero set function cannot be set.

     

    External input setting function
    One of four functions, “zero setting function,” “teaching function,” “emission stopping function” and “trigger function” can be assigned to an external input line.
    External input setting function

     

    Display setting function
    How to indicate measured values of the moving sensed object can be chosen from three options, “Normal,” “Invert” and “Offset.”

    Example : HG-C1050
    Display setting function

     

    Peak and bottom hold functions

    The peak hold function holds the maximum measured value which is output and displayed.
    The bottom hold function holds the minimum measured value which is output and displayed.
    * The peak hold function and the bottom hold function cannot be set at the same time.
    * When the zero set function is executed while the peak hold function or the bottom hold function is valid, the held measurement value is reset.

     

    Threshold value fine adjustment function

    Fine adjustment of threshold values can be performed while measurement is proceeding on the display, and even after teaching.

     

    Key lock function

    This function protects setting conditions from unintentional changes.

    * For other functions and procedures for setting the functions, see“PRO Mode Setting”.

    CÔNG TY TNHH THỦ ĐỨC TECH

    Địa chỉ: :    A12/2A  Le Van Viet, Tang Nhon Phu A Ward , 9 District, Ho Chi Minh City

    Điện thoại: 0934 36 1799

    Email:        hanson@thuductech.com.vn

    Website:    www.thuductech.com.vn

     
     

    0934 361 799