DPS-400 series accommodates to the requirements for pressure sensors at production site such as miniaturization of sensors for downsizing equipment, convenient shape to fit into machines, and reduction of man-hours when it comes to replacement.

?Sensor head DPH-100 series Direct installation using a hexagonal wrench ?Direct mounting from above ?Installation in narrow spaces ?Extended freedom of layout ?Single axis type free turning structure

?Controller DPS-400 series Thin body (t10 mm t0.394 in) and multi-unit connection on a DIN rail helps to downsize equipment for better construction.

The controller is equipped with a 4-digit dual digital display. Because the threshold value can be adjusted while checking the "current value (current pressure value)", direct setting and checking of the "threshold value" is made smoothly without having to switch screen modes.

The quick-connection cables enable reductions in wiring. The connections and man-hours for the relay terminal block setup can be reduced and valuable space is saved. Also, DPS-400 series can be connected side-by-side with fiber sensors FX-300 series or laser sensors LS-400 series.

Ultra high-speed response time contributes to even greater productivity.

The sensor is equipped with two independent comparative outputs in which separate sensing modes can be selected.

(1) EASY mode
This mode is used for comparative output ON / OFF control.

(2) Hysteresis mode
This mode is used for setting comparative output hysteresis to the desired level and for carrying out ON / OFF control.

(3) Window comparator mode
This mode is used for setting comparative output ON or OFF at pressures within the setting range.

(4) Forced output ON mode
The comparative outputs are forcibly maintained at ON irrespective of the set values.

(5) Forced output OFF mode
The comparative outputs are forcibly maintained at OFF irrespective of the set values.

Using a hexagonal wrench, obstructions can be avoided and installation can be done easily by turning the bolt from above.