FACTORY AUTOMATION : Digital Pressure Sensor [For Gas] DP-0

Home 〉 SẢN PHẢM 〉 FACTORY AUTOMATION 〉 SEIMENS 〉 Digital Pressure Sensor [For Gas] DP-0

ONLINE SUPPORT

MR. TUNG

0934 36 1799

[email protected]

Digital Pressure Sensor [For Gas] DP-0

Lượt xem : 1846

Product name: Digital Pressure Sensor [For Gas] DP-0

Category: Sensors

CONTACTS: 0934.361.799

Liên hệ

Details

Product information

Simpler and Easier to Use

CE Approved
CE : EMC Directive

Features

Simple & Easy Operation

Two levels of setting mode for easy operation of essential functions
The "RUN mode" is for threshold value setting, zero point adjustment and key lock setting / release setting, and the "detailed setting mode" allows for basic settings for sensor operation. The two-level setting mode configuration enables easy and immediate use of the product.

Main menu for detailed setting mode

Operation setting mode

Select from EASY mode, hysteresis mode or window comparator mode.

NO / NC setting mode

Set the comparative output operation to NO or NC.

Response time setting mode

Select the response time from 2.5 ms, 25 ms or 250 ms.

Display color setting mode

Select the comparative output ON / OFF display color and the normal display color from red or white.

Functional Design

Black body for enhanced visibility of LCD display
The unit body is completely black to make the LCD display easier to see.

Firm and crisp clicking feel
The buttons offer firm and crisp clicking feel for smooth and reliable setting operations.

High-Quality LCD Display

Simple and highly visible display
The LCD offers a wide viewing angle so the display is easy to see even from an oblique angle. The alphanumeric display (12-segment display), key lock mark and OVER mark further enhance the recognition of display.

Selection of display color from red or white
The display color can be selected from red or white in accordance with the output operation. Since the detailed setting mode display is pink (unchangeable), the pressure sensor status can be easily recognized by color.

Display color setting	RUN mode		Detailed setting mode
Display color setting	Comparative output ON	Comparative output OFF	Detailed setting mode
Red for ON, white for OFF	Red	White	Pink
White for ON, red for OFF	White	Red
Red in normal status	Red
White in normal status	White

Compact & Light Weight Design

Extra-short depth and light weight
The unit body measures only 24.9 mm 0.980 in in depth to allow installation in a narrow space. The main unit weighs only about 25 g. The lightweight unit means minimal load when mounted on a moving part such as a robot arm.

Low Pressure Type and High Pressure Type Available

Two types to choose from according to applications
The low pressure type can be used with positive or negative pressure, while the high pressure type is suitable for positive pressure of up to 1 MPa.

Three Output Modes

Equipped with three output modes for use in a wide range of applications

(1)EASY mode This mode is used for comparative output ON / OFF control.

H: 4 digits (fixed) (10 digits or more when using psi unit)

(2)Hysteresis mode This mode is used for setting comparative output hysteresis to the desired level and for carrying out ON / OFF control.

H: 2 digits or more (5 digits or more when using psi unit)

(3)Window comparator mode
This mode is used for setting comparative output ON and OFF at pressures within the setting range.

H: 4 digits or more (10 digits or more when using psi unit)

Designed for Easy Installation

Tight installation is possible
An exclusive mounting bracket that is suitable for 1 to 3 mm 0.039 to 0.118 in panel thickness is available.

Supports tight installation
Space savings can also be achieved even when an L-shaped mounting bracket is used.

Cable can be connected with one-touch

Connector attached cable (2 m 6.562 ft), as an accessory, can be connected easily with one-touch connection.

* Options: 1 m 3.281 ft / 3 m 9.843 ft / 5 m 16.404 ft types are also available.

Types without connector attached cable are also available [DP-00?-J]
Commercially-available connectors can be used for cable connections. Cables in required length can be used, so this contributes to reduction in waste of unwanted cables.