logocuoi.png

  • sk
  • sk
    HomeSẢN PHẢMFACTORY AUTOMATIONSunX - PanasonicServo motor 〉 Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

    ONLINE SUPPORT

    MR. TUNG

    0934 36 1799

    hanson@thuductech.com.vn

    Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100
    Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

    Thin body controller can do cascade connection and communication with upper devices

    Head-separated Dual Display Digital Pressure Sensor DPS-400 / DPH-100
    CE Marking

    CE Approved
    CE : EMC Directive

    Features

    Works like a fiber sensor

    DPS-400 series accommodates to the requirements for pressure sensors at production site such as miniaturization of sensors for downsizing equipment, convenient shape to fit into machines, and reduction of man-hours when it comes to replacement.

    ?Sensor head DPH-100 series

    Direct installation using a hexagonal wrench

    ?Direct mounting from above
    ?Installation in narrow spaces
    ?Extended freedom of layout
    ?Single axis type free turning structure

    DPH-100 series Direct installation using a hexagonal wrench

    ?Controller DPS-400 series

    Thin body (t10 mm t0.394 in) and multi-unit connection on a DIN rail helps to downsize equipment for better construction.

    DPS-400 series  Thin body (t10 mm t0.394 in)

    Current value and threshold value can be checked simultaneously on the dual display

    The controller is equipped with a 4-digit dual digital display. Because the threshold value can be adjusted while checking the "current value (current pressure value)", direct setting and checking of the "threshold value" is made smoothly without having to switch screen modes.

    Current value and threshold value can be checked simultaneously on the dual display

    Wire-saving, space-saving

    The quick-connection cables enable reductions in wiring. The connections and man-hours for the relay terminal block setup can be reduced and valuable space is saved. Also, DPS-400 series can be connected side-by-side with fiber sensors FX-300 series or laser sensors LS-400 series.

    Wire-saving, space-saving

    Network communication

    Connection to CC-Link open network is possible through the communication unit for CC-Link SC-GU2-C. Monitoring or setting changes can be carried out via a PLC, PC, etc.

    Network communication

    Ultra high-speed response time at 150 μs

    Ultra high-speed response time contributes to even greater productivity.

    Independent dual outputs and five output modes equipped

    The sensor is equipped with two independent comparative outputs in which separate sensing modes can be selected.

    (1) EASY mode
    This mode is used for comparative output ON / OFF control.

    (2) Hysteresis mode
    This mode is used for setting comparative output hysteresis to the desired level and for carrying out ON / OFF control.

    (3) Window comparator mode
    This mode is used for setting comparative output ON or OFF at pressures within the setting range.

    (4) Forced output ON mode
    The comparative outputs are forcibly maintained at ON irrespective of the set values.

    (5) Forced output OFF mode
    The comparative outputs are forcibly maintained at OFF irrespective of the set values.

    Hexagonal wrench installation saves man-hours and spaces [Industry first*]

    Using a hexagonal wrench, obstructions can be avoided and installation can be done easily by turning the bolt from above.

    Hexagonal wrench installation saves man-hours and spaces [Industry first*]

    Quick maintenance

    During maintenance, the sensor head needed to be removed can be easily removed from directly above.

    Quick maintenance

    Mounting shape at 14 mm 0.551 in

    Because the dead zone caused by the nut is eliminated, the narrowed-down thickness after installation contributes to space saving.

    Mounting shape at 14 mm 0.551 in

    THU DUC TECH Co., Ltd

    Address: : A12/2A  Le Van Viet, Tang Nhon Phu A Ward , 9 District, Ho Chi Minh City

    Phone: 0934 36 1799

    Email: hanson@thuductech.com.vn

    www.thuductech.com.vn

    0934 361 799